This guide explains how to access your router’s admin panel using the IP address 10.10.10.1. You will learn how to connect to your router network, enter the IP correctly in a web browser, and log in with the default or your own credentials. Once inside, you can change Wi-Fi settings, update firmware, or set up parental controls.
Beginner
3 min
How to log in to 10.10.10.1
Learn how to access your router’s admin panel at 10.10.10.1 in five simple steps.
10.10.10.1
8 views
Step-by-step instructions
-
1
Connect to Router Network
Connect your device to the router via WiFi or Ethernet cable
Tip
Use Ethernet for a stable connection during setup
-
2
Open Web Browser
Open Chrome, Firefox, Edge, or Safari
Tip
Clear browser cache if the page doesn't load
-
3
Enter IP Address
Type http://10.10.10.1 in the address bar and press Enter
Note
Do not add www or .com – just the numbers
-
4
Enter Login Credentials
Enter username and password
Credentials
Try admin/admin or check the sticker on your router
Warning
Change the default password after first login
-
5
Access Admin Panel
You should now see the router settings dashboard
Troubleshooting
If the page doesn't load, check your network connection or reset the router